Corrugated board is the fluted material used in mailers, outer cartons, displays and dividers. Specify the wall construction, flute arrangement and required performance separately from the finished box style.
Specify the actual wall and flute arrangement, liners and relevant caliper or material specification rather than inventing a standard board range. Direct printing and a printed laminated face sheet need separate reviews. Folded paperboard provides a different fitment or carton route; greyboard commonly forms a wrapped rigid core. Where strength matters, distinguish board measurements from tests of the complete converted box and loaded pack.
Packaging engineers and import buyers should start with the load, box dimensions and distribution conditions. Single and double wall describe layer arrangements. The final performance also depends on liners, flute, converting, closure and internal support. Do not select a payload from the wall name alone or substitute a material without reviewing the pack.
A direct-printed corrugated surface and a printed sheet laminated to corrugated board can give different graphic results and converting requirements. Compare the approved print reference as well as the board specification. For fitted dividers, flute direction and cut edges are relevant to placement and assembly, so include the actual layout in the review.
Provide finished-box dimensions, packed mass, intended wall/flute construction, print reference and agreed evaluation criteria. Ask the technical team to distinguish material measurements from complete-box tests.
Finished corrugated-packaging enquiries normally use a 1,000-piece MOQ and a 35-day production lead time. The material review should establish the board specification before the order schedule is agreed.
Related selections: Corrugated Boxes, Paperboard & Cardstock.
Send the actual product dimensions, preferred structure, material and finish requirements, artwork or reference, estimated order quantity and destination country. LUX BOX will review the specification and sampling scope for your corrugated board project.
No. Edge crush concerns a board measurement; box compression concerns the complete box under the specified evaluation. Use the metric that matches the purchasing requirement.
No. State the actual proposed construction and relevant material specification. The wall count alone is incomplete.
It can be considered, but support geometry, cuts and assembly need their own review. The outer-carton grade alone does not establish the insert’s fit.
